Heat Staking Thermal Press

Pneumatic Heat Staking Thermal Press

Standard Features

  • Micro-processor based system controls
  • System part cycle counter
  • Easy access gross head height adjustment
  • Pressure regulator / filter
  • Password protected machine setup menu
  • Adjustable hydraulic speed control
  • Fine pitch 24 tpi mechanical depth stop
  • True system dwell time
  • Internal PID based temperature controllers with auto-tune feature
  • In-temperature feature with out of temperature alarm
  • Multiple cycle counter and re-settable day counter
  • Internal multi-zone temperature control adjusted through touch screen display
  • Post cooling
  • 6″ of available stroke
  • Quick tooling change over
  • Lock out/tag out system dump
  • Operating manual
  • TSD (Touch Screen Display)

Options Available

  • Adjustable leveling base
  • Automation remote actuation cables
  • Pneumatic or Manual part clamping
  • Standard rotary table with light curtain actuation
  • Machine stand with casters
  • Manual or pneumatic slide table
  • Part presence detection hardware


  • Nominal Pressure: ½ ton
  • Clamp Pressure @ 80 psi: 1000lbs
  • Cylinder Bore Diameter: 4.00"
  • Power Required: 240 VAC, 1 phase, 20A
  • Pneumatic required: Clean, dry air at 100 psi / 7 bar


  • Work base: (22.25 x 15 x 4 inches)
  • Part height maximum: 13.50 inches
  • Overall dimensions: 15 W x 22.25 D x 50 H inches)
  • Stroke: 6.00 inches
  • Throat: 7.00 inches from center of the head
  • Weight: 250 lbs

System Controls

  • Micro-processor based system control offers large easy to read LCD TSD (touch screen display.)
  • System parameters are easily entered into the “TSD" through a large pop up menu numeric key pad
  • In-temperature feature checks system prior to every cycle to assure proper operating temperature/ operating window can be adjusted in 1 degree increments above and below temperature set point
  • True system dwell time and post cooling time destroy part memory and assure a tight assembly
  • Password protected machine setup menu, allows only authorized operators to change the operating mode of the system
  • Post cooling, part presence detecting can be turned on or off by a simple press of a button
  • Multiple cycle counter, and re-settable day counter
  • Internal multi-zone temperature control through touch screen capable up to four zones standard